Maier MLK 32F4

Sliding headstock automatic lathe with 16 axes, bar feeder, short turning feature to produce even the most complex short turned parts from 0.3 to 32 mm in diameter and a length of 900 mm, individually or in lots, capable of runs into the tens of thousands.

TSUGAMI M08SYE

Turning/milling machine, six axes, with short bar feeder for diameters of up to 65 mm, complete production of complex turned parts up to 160 in diameter, individually or in small lots.

MURATA MT200

Multifunctional turning/milling centre for the complete machining of bar parts up to 65 mm in diameter and chuck parts up to 140 × 200 mm in diameter, fully automated with handling of unmachined parts and finished components.

OKUMA MULTUS 4000

Multifunctional turning/milling centre, five axes, simultaneous 3D milling, for the complete machining of chuck parts up to 450 mm in diameter.

INDEX C200

High-performance turning/milling machine with 42 tool pockets, short bar feeder, part gripper to remove parts onto a conveyor, complete production of simple to complex turned parts from bar stock up to 65 mm in diameter, capable of runs of 100 to 50,000.

OKUMA LT 2000 EX

Turning/milling centre with short bar feeder, complete production of turned parts from bar stock up to 65 mm in diameter, individually and in runs of up to 5,000.

OKUMA Mac-Turn 250

Multifunctional turning/milling centre for the production of chuck parts up to 250 mm in diameter using the bar feeder and for highly complex runs with a diameter of up to 65 mm, part removal feature.

MAIER ML 32F2

Sliding headstock automatic lathe with 15 axes and bar feeder, complete production of complex turned parts from 0.3 to 32 mm in diameter and a length of 900 mm, capable of runs of 100 to 50,000.

OKUMA LT200

Turning centre with short bar feeder, high-performance turning machine for the production of lots, ideal for diameters up to 42 mm and runs of up to 10,000.

OKUMA LB200

Turning centre with short bar feeder, production of individual parts or lots.

Gildemeister GD16

Sliding headstock automatic lathe with bar feeder, turning machine for runs with the complete machining of turned parts from 0.3 to 14 mm in diameter and a length of 80 mm, capable of runs of up to 50,000.

WEMAS DZ150

CNC turning machine for the production of small runs and individual parts up to 120 mm in diameter.

OKUMA MAH-400

High-speed horizontal milling centre for the production of cubic parts and 3D milling up to 400 × 400 mm with pallet changer, for individual parts and runs of up to 10,000.

Hitachi-Seiki HG500

Horizontal machining centre for the production of cubic parts up to 650 × 650 mm with pallet changer.